HOME > Product Category > Tact Switch > EN047D-01M-320

TACT Switch EN047D-01M-320


Mechanical life: 200,000 cycles min
Electrical life: 200,000 cycles min
Contact Rating: 20 mA @15VDC
Insulation Resistance: 100M Ω DC500V
Withstand Voltage: AC250V 1 minute
Contact Resistance: 100m Ω
Ambient Humidity: 45 ~ 85%RH
Operating Temper.: -20 °C to 70 °C
Operating Force: 320 ± 100gf (middle); 200 ± 50gf (around)
Soldering process: Hand Soldering: Use a soldering iron of 30 watts, controlled at 380 °C approximately 3 seconds while applying solder
Reflow soldering: When applying reflow soldering, the peak temperature of the reflow Oven should be set to 250 °C max. Condition for soldering (Reflow & Non-washable Type) Temperature Profile:(Figure 1)


Button: HTN (High Temperature NYLONG) (UL94 V-0)
Sleeve: HTN (High Temperature NYLONG) (UL94 V-0)
Base: HTN (High Temperature NYLONG) (UL94 V-0)
Case: Stainless Steel
Spring plate: Stainless Steel
Terminals: Phosphor Bronze
Adhesive Tape: Polyimide



1500switches shall be packed in a reel; Ten (10) reels at maximum shall be packed in a package.